Open issues

Missing file fmcomms3.xml
OCPI-93
Initial FSK Application using Zedboard with FMCOMMS3; under-sampling Error while writing large amounts of data to the output file.
OCPI-96
Is there a published list of OpenCPI Ready platforms.
OCPI-94
Cannot find GNU Radio support
OCPI-92
Add doc explaining how to support a new platform (both hw and sw)
OCPI-91
primitive core/library "fixed_float" not found
OCPI-90
LiquidDSP dependency missing (in build2 at least)
OCPI-89
Restructure the compilation process
OCPI-88
Install documentation missing shell variables
OCPI-87
no good way to export 3rd party software libraries with workers
OCPI-76
Control Plane timeout errors not recorded in Status register
OCPI-71
segmentation fault in new build on multiple platforms
OCPI-8
ad9361_data_sub.xml parameterized signals are not generated properly based on parameters set in platform XML
OCPI-95
Lime Zipper card spec(s)
OCPI-85
Proposed Zynq Platform Build Script Improvements for Kernel Modules
OCPI-84
ocpirun SEGFAULT caused by null pointer
OCPI-83
Makefile Informative Output
OCPI-82
platforms/zed/formatSD.sh "unrecognised disk label" bug
OCPI-81
more helpful error messages
OCPI-74
Zynq Clock utility
OCPI-73
Overriding an assembly's Makefile variables on the command-line fails to have an implact on the build
OCPI-72
README for environment variables
OCPI-65
Proposed Zed Platform Build Script Improvements
OCPI-62
Vague error message about unloaded driver for zynq during application run
OCPI-59
Docs: Install Guide CENTOS - no env vars set
OCPI-55
Platform XML signal declaration is case sensitive
OCPI-52
reworking of log levels for exceptions
OCPI-50
get rid of manual steps upon zedboard reboot
OCPI-46
file_read.hdl fails simulations when input file size less than 'messageSize'
OCPI-41
Primitives and workers can not have same name
OCPI-38
Spec change caused ocpirun to fail
OCPI-20
Assemblies with capital letters names break ISIM
OCPI-7
install-centos6.sh bugs
OCPI-79
all messages are coming out as stderr instead of stdout
OCPI-70
issue 1 of 34

Missing file fmcomms3.xml

When compiling for the ZedBoard, the compilation stops due to a missing xml file.

_Making compressed bit file: target-zynq/testbias_zed_gp1_use_gp1.bit.gz from target-zynq/testbias_zed_gp1_use_gp1.bit and target-zynq/testbias_zed_gp1_use_gp1-art.xml
For file gen/testbias_zed_base_fmcomms3_zed.xml: File "fmcomms3" could not be opened for reading/parsing. Files tried: gen/fmcomms3.xml, fmcomms3.xml, gen/fmcomms3.xml, /opt/opencpi/hdl/platforms/zed/lib/fmcomms3.xml, /opt/opencpi/hdl/platforms/zed/lib/hdl/fmcomms3.xml, ../fmcomms3.xml, ../gen/fmcomms3.xml, /opt/opencpi/prerequisites/ad9361/include/fmcomms3.xml, /opt/opencpi/components/lib/fmcomms3.xml, /opt/opencpi/components/lib/hdl/fmcomms3.xml, /opt/opencpi/exports/lib/components/fmcomms3.xml, /opt/opencpi/exports/lib/components/hdl/fmcomms3.xml, /opt/opencpi/hdl/adapters/lib/fmcomms3.xml, /opt/opencpi/hdl/adapters/lib/hdl/fmcomms3.xml, /opt/opencpi/exports/lib/adapters/fmcomms3.xml, /opt/opencpi/exports/lib/adapters/hdl/fmcomms3.xml, /opt/opencpi/exports/specs/fmcomms3.xml, ../../lib/xm/fmcomms3.xml, ../../lib/rcc/fmcomms3.xml, ../../lib/hdl/fmcomms3.xml, ../../lib/ocl/fmcomms3.xml, ../../lib/assy/fmcomms3.xml, ../../specs/fmcomms3.xml, ../../testbias/fmcomms3.xml, ../lib/xm/fmcomms3.xml, ../lib/rcc/fmcomms3.xml, ../lib/hdl/fmcomms3.xml, ../lib/ocl/fmcomms3.xml, ../lib/assy/fmcomms3.xml, ../specs/fmcomms3.xml, ../../testbias/lib/hdl/fmcomms3.xml, ../../testbias/lib/fmcomms3.xml, /opt/opencpi/hdl/devices/lib/hdl/fmcomms3.xml, /opt/opencpi/hdl/devices/lib/fmcomms3.xml, /opt/opencpi/exports/lib/devices/hdl/fmcomms3.xml, /opt/opencpi/exports/lib/devices/fmcomms3.xml, /opt/opencpi/hdl/cards/lib/hdl/fmcomms3.xml, /opt/opencpi/hdl/cards/lib/fmcomms3.xml, /opt/opencpi/exports/lib/cards/hdl/fmcomms3.xml, /opt/opencpi/exports/lib/cards/fmcomms3.xml. CWD is /opt/opencpi/hdl/assemblies/testbias/container-testbias_zed_base_fmcomms3_zed
/opt/opencpi/exports/include/hdl/hdl-container.mk:104: *** Failed to process initial parameters for this worker: 1. Stop.
make: *** Error 2
make: *** Error 2
make: *** Error 2
make: *** Error 2
make: Leaving directory `/opt/opencpi/hdl'
make: *** Error 2
_

Status

Assignee

Unassigned

Reporter

OpenCPI Guest

Components

Priority

Blocker